Smart home and IT service in Seewalchen am Attersee
In Seewalchen am Attersee we plan and set up smart home systems with KNX or Loxone and look after the IT of businesses and households. From Lenzing it is five kilometres, about ten minutes by car.
Florin Feier, Owner · calls you back personally
Waldstraße 19/1, 4860 Lenzing · All prices public · Answer within 24 hours on working days
Flats by the lake, second homes and holiday lets have different needs from a family house lived in all year.
Updated:
- Distance from Lenzing
- 5 km
- Driving time
- 10 min
- Region
- Bezirk Vöcklabruck
How this was measured: road route from Waldstraße 19/1 in Lenzing to the centre of the town, route planner OSRM based on OpenStreetMap, measured on 9 October 2026 and re-checked on 13 October 2026 (deviation at most 2 km); travel time rounded to 5 minutes.
Seewalchen lies at the northern end of the Attersee, where the lake drains into the Ager. The town is a residential and commercial location with a municipal office, lakeside, lido and sailing. Many houses belong to people who are only there part of the time: as a second home, a holiday flat or a property let by the day. Such houses benefit most from building technology you can see and control from afar.
A house used three weeks a year needs something different from a house with a family in it. Heating and ventilation should run economically while nobody is there, and reach a comfortable temperature before arrival. A water leak, an open window and frost should appear as a message on the phone, not as damage in autumn. For let flats there is access as well: key handover without anyone present, a separate entry code per guest. Alongside, Seewalchen has trades, practices and offices that need reliable IT. We keep the two apart: building technology and office IT run on separate networks, so a fault in one does not touch the other.
Sources for the facts about this place: Wikipedia: Seewalchen am Attersee
Rather talk right away?
Leave your number and Florin Feier will call you back.
Who looks after businesses in Seewalchen am Attersee when IT goes wrong?
Florin Feier of WVM-IT from Lenzing, 5 kilometres away: by remote access across Austria, on site by appointment. Single help without a contract costs €95 per hour.
Examples of what enquiries from Seewalchen am Attersee can look like
- A second home where the heating should only run in winter when someone is coming, and can be warmed up by phone beforehand.
- A holiday flat with a key box that is to be switched to an access system with its own code per guest.
- A house on a slope where shading and lighting should follow the sun in summer.
- An old building where a wireless system for lighting and radiators is retrofitted without chasing walls.
- A boathouse or outbuilding that needs its own network connection and temperature monitoring.
- A trade business whose office and workshop share one network and should be separated.
- A practice or office with a router nobody understands any more, and a backup that was never tested.
Getting from Lenzing to Seewalchen
From our office in Lenzing to Seewalchen am Attersee it is five kilometres, and the drive usually takes ten minutes. The short distance makes surveys and small follow-up visits easy to plan. We charge working time at €120 per hour on site plus travel, which stays small at this distance. We arrange appointments beforehand so that someone is in the house and we can reach the distribution board and router. In high summer we allow a few extra minutes for traffic around the lake.
A house or flat that is only lived in part of the time
With second homes by the lake, damage usually happens when nobody is there: a pipe freezes, a window stays open, a device fails. A good smart home system does not prevent that on its own, but reports it in time. A water detector under the sink, a temperature sensor in the unheated cellar and a window contact on the roof window are often enough. Add a heating mode that holds a low level in winter and is raised by app before arrival. What matters is that someone receives the message and can act: family, neighbours or a caretaker. We plan it so that the technology stays simple and operation works even after a long break without instructions. A switch that behaves differently after winter is a flaw in the concept, not in the resident.
Holiday flats and guest access
Anyone who lets a flat on the Attersee by the day knows the problem: guests arrive at different times, and key handover costs nerves. A code lock with a time window solves that, and so does a separate guest Wi-Fi. Separation matters here: the guests' network must not have access to the landlord's private network, to printers, smart TVs with accounts or cameras. The router should also come back online by itself after a power cut. We set that up, check later remotely, and only come when a device really has to be replaced. Legal questions, for example on liability for guest Wi-Fi or on cameras, we do not answer; that is for the Chamber and lawyers. Technically we stick to the obvious: store as little guest data as possible and record nothing that is not needed.
Difference from the Attersee region page
Our page on the Attersee region deals with network and Wi-Fi for accommodation businesses, meaning hotels and guesthouses with many guests. This page is about the single house, the flat and small businesses in Seewalchen: building technology that fits daily life and use. The two areas rarely overlap, because a family house needs no hotel network, and a hotel usually does not need KNX in every room. What both need is a solid network as the basis. If you are not sure where your project belongs, tell us briefly what you have in mind. We will say honestly whether we are the right contact, or tell you what would be better with a specialised electrical firm. Planning cables and distribution boards in a new build belongs in the hands of an authorised electrician anyway.
What brings us to Seewalchen
- Survey of the house: what is wired, what can be retrofitted, what only works wirelessly
- Planning and setup of KNX or Loxone systems for lighting, heating, shading and alarm messages
- Network and Wi-Fi in the house and garden, including outbuildings and boathouse
- Guest access: code lock, key handover without meeting, separate guest Wi-Fi
- Office IT in practices and businesses: workstations, network, data backup
On-site appointments are arranged in advance, with a price. On-site work is charged at €120 per hour, net plus VAT and travel.
Single tasks — fixed price, no contract
What we do remotely
Once installed, a home system can often be looked after remotely: updates, adjusting schedules, evaluating messages and fixing software faults. We check whether devices are reachable and adapt scenes and rules without anyone having to be in the house. The same applies to office IT in Seewalchen: updates, accounts, email and data backup.
Services for businesses in Seewalchen am Attersee
Ongoing IT support for businesses in Seewalchen am Attersee and the surrounding area is handled by Florin Feier himself; more about him, examples of our work under case studies.
Frequently asked questions
Do you set up smart home systems in Seewalchen?
Yes, on request. We plan and set up KNX and Loxone systems and agree with you beforehand what the system should do. We quote after a site visit, because the cost depends on the house. We do not have standard prices for smart home.
What is the difference between KNX and Loxone?
KNX is an open standard in which many manufacturers work together. It is common in new builds and larger conversions. Loxone is a closed system from one source, easier to start with and often cheaper for retrofits. Which suits better depends on the house, budget and the scope you want.
Can a second home by the lake be monitored remotely?
Yes. Temperature and humidity sensors, water detectors, window contacts and a securely reachable access are sensible. What matters is that the alerts reach someone who can act. We settle that together with you and a person nearby.
Do I need a new house, or is a retrofit enough?
A retrofit is often possible. Wireless solutions need no chasing of walls but are more demanding with batteries and range. In rooms that are being renovated anyway, cabling is worthwhile. We assess that at an on-site appointment.
How secure is a home system that can be reached over the internet?
Secure enough if set up properly: no open access from the internet, but an encrypted connection, strong passwords and regular updates. We set it up that way and check it later remotely.
How far is it from Lenzing to Seewalchen, and what does travel cost?
It is five kilometres, about ten minutes. A job on site costs €120 per hour plus travel, remote support €95 per hour, each net. For Seewalchen the travel is so short that it hardly matters.
Do you also look after the network of a holiday let?
Yes, that is a common case. Guest Wi-Fi separated from the landlord's network, routers that come back after a power cut, and a remote view of their state. For larger sites with hotel operation there is the page on the Attersee region.
We will get back to you within 24 hours on working days.
What happens next
- We read it and place it
- We come back with an assessment
- Only then do you decide
If it is urgent, call: +43 676 3808501