Building automation with Loxone and KNX
WVM-IT plans, programmes and maintains building automation with Loxone and KNX: lighting, heating, shading, access, security and media technology in one system — KNX as a cross-vendor standard with more than 500 manufacturers, Loxone as a closed system from a single source.
Florin Feier, Owner · calls you back personally
Waldstraße 19/1, 4860 Lenzing · All prices public · Answer within 24 hours on working days
Installations of this kind are calculated per project and built on site — we quote after a short conversation and a survey, not before.
Updated:
In building automation the result is not decided by the hardware but by the programming. The same devices can produce a system nobody understands, which gets operated by hand again after the first summer — or one that simply does what you expect. So we plan the behaviour first and the parts list second.
Where this pays off
- Lighting, heating and shading run as three separate systems side by side.
- The system can do a lot, but nobody except the installer can change it.
- A new build is about to go into electrical planning and the decisions are being made now.
- Access control and surveillance should work together with the rest of the technology.
What we take on
- Planning together with the electrician and architect, before the cabling
- Loxone and KNX: selection, installation, commissioning
- Programming the behaviour: lighting, heating, shading, scenes
- Access, cameras and alarm integrated into the same system
- A handover briefing so the system stays operable without us
- Support and extension later, without rebuilding everything
How a project runs
- 01
Conversation and survey
We work out what the system should do and what state the building or the planning is in. For new builds as early as possible — after plastering, every change gets expensive.
- 02
Concept and fixed price
You receive a concept with a parts list, a description of the behaviour and the price. Only then is anything ordered.
- 03
Install, programme, hand over
We install, programme and brief you. The documentation stays with you so another specialist could carry on.
Why there is no starting price here
A figure at this point would be guesswork. The price of an installation depends on the number of rooms, the state of the cabling and whether the work is in a new build or an existing one — the range is too wide for a meaningful starting price. We calculate per project and quote in writing after the survey. On-site work is billed at €120 per hour plus travel unless a fixed price is agreed. Who stands behind this service is described on the About us page; examples of our work are under case studies.
Guide prices, net plus VAT. As of: October 2026 · All prices at a glance
Rather work it out yourself first?
What you will not get from us
- Runs from quarter to quarter — cancellable with one month’s notice to the end of a quarter.
- No systems you cannot leave: accounts and data belong to you.
- No hardware you don't need. We recommend what is necessary and say so when something isn't worth it.
- No round-the-clock on-call. Monitoring alerts at night and at weekends too, but alerts are handled Monday to Thursday from 7:30am to 9pm, Friday until 8:30pm, Saturday until 8pm; the emergency page explains what that means.
Frequently asked questions
Loxone or KNX — which is better?
KNX is a manufacturer-independent standard with a very large device choice and long availability; Loxone is a more closed system that is quicker to set up and needs less planning effort. Which one fits depends on size, budget and how independent you want to be later. We tell you in the conversation what we would recommend for your project.
Can this be retrofitted in an existing building?
Often yes, using radio components and by replacing individual points. It is rarely as complete as in a new build and is most worthwhile where renovation is happening anyway. We say beforehand what is possible and what is not.
Will I depend on you afterwards?
No. You receive the programming, the documentation and all access. Any specialist who knows the system can carry on with it.
Do you do this across Austria and Germany?
This work happens on site and is therefore decided per project — unlike our IT support, which runs independently of location. Send an enquiry and we will tell you whether we can take your project on.
We will get back to you within 24 hours on working days.
What happens next
- We read it and place it
- We come back with an assessment
- Only then do you decide
If it is urgent, call: +43 676 3808501
Related reading
Articles, comparisons and terms on exactly this topic — written for businesses facing the same decision.
- Beitrag Loxone oder KNX — was passt für welches Gebäude? KNX ist ein herstellerübergreifender Standard, an den sich über 500 Hersteller halten: Geräte verschiedener Hersteller arbeiten zusammen, die Anlage ist langlebig und unabhängig von einer einzelnen …
- Festpreis Loxone setup and takeover | WVM-IT WVM-IT takes over existing Loxone and KNX systems, extends them and reprograms them: lighting, heating, shading, access control and alarm. That explicitly includes systems whose installer …
Where we work on site
Ongoing support runs by remote access across Austria. For jobs that need hands on site, each of these places has its own page with travel time and typical jobs.
Often requested together
Conference technology
Equipping meeting rooms: displays, cameras, microphones, sound and control at the push of a button. On-site from €120/hr. Request a quote.
on requestNetwork & Wi-Fi
Network and Wi-Fi surveyed, planned and installed — from €890, including workshops and multiple floors. Request a free quote now.
from 890 €IT support & management
IT support in Upper Austria and Salzburg: from €29 per workstation and month, remote support €95/hour. Get in touch now.
from 29 €/mo